[Aug 12, 2023] JN0-682 Ultimate Study Guide - Lead2Passed [Q66-Q87]

Share

[Aug 12, 2023] JN0-682 Ultimate Study Guide - Lead2Passed

Ultimate Guide to Prepare JN0-682 Certification Exam for JNCIP-DC in 2023


To earn the Juniper JN0-682 certification, candidates must have a solid understanding of data center networking, as well as hands-on experience with Juniper Networks products. Data Center, Professional (JNCIP-DC) certification is ideal for IT professionals who are responsible for designing, implementing, and managing data center networks, as well as those who work with Juniper Networks technologies on a daily basis. Data Center, Professional (JNCIP-DC) certification validates an individual's expertise in working with Juniper Networks products and technologies, making them a valuable asset to any organization.


To prepare for the Juniper JN0-682 exam, candidates need to have a solid understanding of data center technologies and Juniper Networks' products and solutions. Juniper Networks offers various training courses and study materials to help candidates prepare for the exam. Additionally, candidates can use online resources, study guides, and practice exams to enhance their knowledge and skills. Passing the Juniper JN0-682 exam is an excellent way to advance one's career in the field of data center technologies and become a certified Juniper Networks professional.

 

NEW QUESTION # 66
You have deployed a VXLAN as shown in the exhibit Leaf1, leaf3, spine1, and spine2 have been configured
as VTEPs. Host1 cannot communicate with host2.

Referring to the exhibit, how would you solve this problem?

  • A. The VLAN ID on the connected to host2 must be changed to VLAN 100
  • B. A layer 3 VXLAN gateway must be configured on at least on at least one of the devices
  • C. A DCI connected must be created between the VLANs
  • D. Host1 and host2 must be placed in the same VRF

Answer: B

Explanation:
Explanation
You need an L3 gateway to route between those two different subnets/VLAN's


NEW QUESTION # 67
The MC-LAG group shown in the exhibit is providing high availability services for the directly connected servers. The backup liveness detection is applied to the ICL-PL link, however, when one of the members rebooted, there was traffic loss for a few seconds.

In this scenario, where should you apply the backup liveness detection?

  • A. On the ae1 interface
  • B. On the ae2 interface
  • C. On the ae0 interface
  • D. On the management interfaces

Answer: D


NEW QUESTION # 68
Exhibit.

Referring to the exhibit, which statement is correct?

  • A. The exhibit shows a 5-stage IP fabric architecture.
  • B. The exhibit shows a 3-stage IP fabric architecture.
  • C. The exhibit shows a collapsed fabric architecture.
  • D. The exhibit does not represent a valid fabric architecture.

Answer: A


NEW QUESTION # 69
You have deployed a multitenant EVPN-VXLAN fabric. You must have the routes in the BLUE VRF show up in the RED VRF. In this scenario, how would you achieve this goal?

  • A. Configure a VRF import policy on the RED VRF that matches the BLUE VRF route target.
  • B. Configure the RED route target in the BLUE VRF.
  • C. Configure a VRF export policy on the BLUE VRF that matches the RED VRF route target.
  • D. Configure the BLUE route target in the RED VRF.

Answer: A


NEW QUESTION # 70
Which two statements define the use of route targets and route distinguishers in an EVPN?
(Choose two.)

  • A. Route targets ensure that routes from different clients remain unique within the data center domain
  • B. Route distinguishers ensure that routes from different client remain unique within the data center domain
  • C. Route distinguishers identify the VRF into which the route should be placed
  • D. Route targets identify the VRF into which the route should be placed

Answer: B,D


NEW QUESTION # 71
You are asked to manage the oversubscription ratio of your spine and leaf IP fabric. You determine that you are at a 3:1 ratio of downstream to upstream traffic and must achieve a
1.1ratio. In this scenario, which two actions would you take to achieve this goal? (Choose two.)

  • A. Reduce the number of leaf nodes on your design.
  • B. Increase the number of spine nodes in your design.
  • C. Reduce the number of server facing that each leaf node uses to carry traffic.
  • D. Increase the number of server facing ports that each leaf node uses to carry traffic.

Answer: B,C


NEW QUESTION # 72
Which EVPN service consists of a single broadcast domain per EVPN instance?

  • A. a port-based service interface
  • B. a VLAN bundle service interface
  • C. a VLAN-based service interface
  • D. a port-based VLAN-aware service interface

Answer: C


NEW QUESTION # 73
You are asked to build a single export policy that can be applied to all devices to advertise only loopback IP addresses in the 172.16.0.0/24 subnet into your EBGP IP fabric. In this scenario, which two solutions would accomplish this task? (Choose two.) A)

B)

C)

D)

  • A. Option D
  • B. Option C
  • C. Option B
  • D. Option A

Answer: B,C


NEW QUESTION # 74
You are building a new IP fabric data center underlay network and want to ensure predicted load- balancing behavior for traffic, traversing the fabric. What are two approaches you should take to satisfy the requirement in this scenario? (Choose two.)

  • A. Ensure that all uplinks are 40GbE.
  • B. Ensure that all spine devices are the same switched mode.
  • C. Ensure that every leaf node has an uplink spine node
  • D. Ensure that every node has a link to every other leaf node

Answer: B,C


NEW QUESTION # 75
Exhibit.


Referring to the exhibit, you want to advertise the IRB routes between both routing instances.
Which two configuration parameters would be applied to accomplish this task? (Choose two.)

  • A. Configure auto-export under both routing instances.
  • B. Apply policy irb-A under instance Tenant_c and apply policy irb-c under instance Tenant_A as import policies.
  • C. Apply policy irb-A under instance Tenant A and apply policy irb-c under instance Tenant_c as export policies.
  • D. Configure vrf-table-label under both routing instances.

Answer: B,D


NEW QUESTION # 76
You want to ensure high availability of the Junos devices in your data center.
In this scenario, which three features would accomplish this task? (Choose three.)

  • A. Multiple Spanning Tree Protocol
  • B. Virtual Router Redundancy protocol
  • C. graceful Routing Engine switchover
  • D. Virtual private LAN service
  • E. Dual Routing Engineers

Answer: B,C,E


NEW QUESTION # 77
Referring to the exhibit, DC1 and DC2 have a DCI across a service provider WAN connection.
Host1 in DC1 must have Layer 2 connectivity to host2 in DC2. A VXLAN tunnel must be created between VTEP1 and VTEP2.
In this scenario, which statement is true?

  • A. A route to the loopback address on VTEP must be present on VTEP1.
  • B. The service provider WAN connection be an MPL5-based WAN connection.
  • C. VTEP and VTEP2 must peer using IBGP.
  • D. VXLAN Layer 3 gateway must be provisioned at the Super Spine layer.

Answer: A


NEW QUESTION # 78
You are asked to scale the available bandwidth within your Clos data center network to support more east-west traffic. In this scenario, what are two ways to accomplish this task? (Choose two.)

  • A. Use aggregated interfaces in the fabric.
  • B. Add leaf devices to increase available paths and bandwidth
  • C. Add spines to increase available paths and bandwidth.
  • D. Interconnect all spines to increase available paths and bandwidth.

Answer: D


NEW QUESTION # 79
Exhibit.

Which statement is true about the route shown in the exhibit?

  • A. The VNI for this route is 304.
  • B. The route uses a type-1 route distinguisher.
  • C. The route target on this route is 1000
  • D. The route is an EVPN type-1 route.

Answer: B


NEW QUESTION # 80
You are asked to scale the available bandwidth within your Clos data center network to support more east-west traffic. In this scenario, what are two ways to accomplish this task? (Choose two.)

  • A. Add spines to increase available paths and bandwidth.
  • B. Add leaf devices to increase available paths and bandwidth
  • C. Use aggregated interfaces in the fabric.
  • D. Interconnect all spines to increase available paths and bandwidth.

Answer: A,C


NEW QUESTION # 81
You are configuring an MX Series router to act as a Layer 3 gateway to route traffic between VXLANs in different data centers across a WAN connection. In this scenario, what must you do to enable this communication?

  • A. Configure route reflectors.
  • B. Configure the IRB interfaces to connect the VXLANs.
  • C. Enable PIM on all interfaces.
  • D. Change the UDP port used by the VXLANs.

Answer: B


NEW QUESTION # 82
You are troubleshooting a connectivity issue across a VXLAN overlay network. In the exhibit, you are using the ping overlay command from a local VTEP residing on a OFX 5120 to a remote VTEP residing on a separate QFX5120.




What is the problem in this situation?

  • A. The VXLAN controller is down.
  • B. VXLAN VN1100 is not configured on both end points.
  • C. VXLAN VN1100 is not configured on the remote VTEP.
  • D. VXLAN VN1100 is not configured on the local VTEP

Answer: C


NEW QUESTION # 83
You are asked to manage multicast traffic in the EVPN-VXLAN environment. You must ensure that multicast traffic is delivered only to the leaf device with interested receivers. In this scenario, which feature is required on leaf devices to accomplish this task?

  • A. IGMP snooping
  • B. PIM
  • C. MSDP
  • D. DVMRP

Answer: A


NEW QUESTION # 84
You want to improve network convergence within a data center during link failures. In this scenario, which EVPN-VXLAN feature will accomplish this task?

  • A. storm control
  • B. MAC mass withdrawal
  • C. Ethernet segment auto discovery
  • D. MAC filtering

Answer: B


NEW QUESTION # 85
Which two statements are correct about VXLAN domains? (Choose two.)

  • A. With Layer 3 traffic, the VLAN ID is transmitted within the packet.
  • B. With Layer 3 traffic, the VLAN ID is discarded before the packet is sent.
  • C. With Layer 2 traffic, the VLAN ID is discarded before the packet is sent.
  • D. With Layer 2 traffic, the VLAN ID is transmitted within the packet.

Answer: A,C


NEW QUESTION # 86
Referring to the VTEP output shown in the exhibit, which two statements are true? (Choose two.)

  • A. The MAC address 52:54:00 2c 4b:a2 belongs to a remote host.
  • B. The MAC address 52:54;00 5e 88 6a belongs to a local host.
  • C. The MAC address 52:54:00 2c 4b:a2 belongs to a local host.
  • D. The. MAC address 52:54:00 5e 88 6a belongs to a remote host.

Answer: A,D


NEW QUESTION # 87
......

JNCIP-DC Fundamentals-JN0-682 Exam-Practice-Dumps: https://certblaster.lead2passed.com/Juniper/JN0-682-practice-exam-dumps.html