A sense of fulfillment follows a certificate earned the honest way. Lead2Passed handles the honest preparation for the API Source Inspector Electrical Equipment exam: 113 practice questions, a written refund policy, and support around the clock.
API API-SIEE Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Topic 1: Electrical Induction Motors | - Materials of Construction - Design and Construction Standards - Motor Testing |
| Topic 2: Motor Control Centers Low to Medium Voltage | - Ground Bus - Materials of Construction - Main Feeder Cable Entry Compartment - Circuit Breakers - Amp Capacity - Main Isolating Switch - Design and Construction Standards - Enclosures Types |
| Topic 3: Switchgear Low and Medium Voltage | - Housing Frames and Enclosure Compartment - LV AC Switchgear Grounding - Current Transformers - Voltage Transformers - Design and Construction - Wiring - Ratings Interlocks - Switchgear Section Compartments - Circuit Breakers - Switchgear Compartment Doors - LV Switchgear Grounding - Metering - Electric Tie Breakers - Control Power Transformers - Bus Compartment |
| Topic 4: Examination Methods, Tools and Equipment | - Typical Electrical Testing Techniques - Dimensional Inspections - Surface Preparation and Coatings Inspections - Visual Inspections - Functional Testing |
| Topic 5: Electrical Skid Mounted Equipment | - Cable Support Systems - Purged and Pressurized Equipment in Classified Locations - Electrical Equipment for Hazardous Classified Locations - Materials of Construction - AC Control Wiring - Industry Codes and Standards - Equipment Grounding |
| Topic 6: Terms and Definitions | |
| Topic 7: Liquid-Immersed Transformers | - Design and Construction - Industry Codes and Standards |
| Topic 8: Equipment Risk Assessment | - Development of a Source Inspection Project Plan - Development of Inspection and Test Plans - Report Review |
| Topic 9: Source Inspection Performance | - Review of Project Documents - Report Writing Nonconformance and Deviations - Inspector Conduct and Safety |
| Topic 10: Electrical Inspection Tools and Test Equipment | |
| Topic 11: Source Inspection Management Program |
API-SIEE Exam FAQ: Straight Answers
API recommends these training resources for the API Source Inspector Electrical Equipment exam:
Follow the training with steady self-testing — the 113 practice questions from Lead2Passed help you apply theory and fill any gaps the training leaves.
The official API Source Inspector Electrical Equipment outline defines 11 domains. The leading three are Equipment Risk Assessment, Source Inspection Performance, and Examination Methods, Tools and Equipment. The full list is in the topics section above, and Lead2Passed's 113 practice questions cover each one.
In-person test center or remote proctored exam Register for the API Source Inspector Electrical Equipment exam through these official channels:
After booking, Lead2Passed delivers your practice questions within 1 minute — preparation starts the same day.
The API Source Inspector Electrical Equipment exam contains 110 questions, 100 scored to complete within 195 minutes. Timed simulation in the Lead2Passed Desktop Test Engine teaches that rhythm before exam day does.
Lead2Passed issues a full refund if you take the API Source Inspector Electrical Equipment exam within 60 days of purchase and do not pass. The policy does not apply if the exam is taken within 3 days of purchase, if the exam was never actually taken, or to free materials or expired orders, and the candidate name must match the payer name. Submit a scan of your enrollment slip and the official Score Report PDF within 2 days of the exam; claims are processed within 7 days. Alternatively, exchange for two free exam products of equal value and keep your original update service. Orders arrive by email within 1 minute — contact support if nothing arrives within 2 hours.
The API-SIEE exam is a API certification exam validating the API Source Inspector Electrical Equipment syllabus shown above. It belongs to these credential paths: API SIEE - Source Inspector Electrical Equipment. Candidates in 2026 prepare for it with Lead2Passed's 113 practice questions, available as a printable PDF, a Windows Desktop Test Engine, and an Online Test Engine — three versions of the same materials.
Prequalification is required. Minimum electrical experience depends on education and background, ranging from 2 to 5 years. Since requirements change over time, confirm the latest on the official API exam page before scheduling.
The API Source Inspector Electrical Equipment exam requires Set passing scaled score to pass, and registration costs USD $380 member / USD $500 non-member. A failed attempt means paying the same fee again — a readiness check with the Lead2Passed engines before booking is the cheaper option.
Three versions of the same study materials: a printable, expert-prepared PDF with free demo download and instant access; a Desktop Test Engine for Windows with customizable simulation and timed modes that works offline; and an Online Test Engine for any browser on Windows, Mac, Android, and iOS with test history and performance review. All 113 practice questions are identical across versions. Every purchase includes 365 days of free updates, a 50% renewal discount afterward, and unlimited computer installations.
API Source Inspector Electrical Equipment Sample Questions:
The primary purpose of the source inspection project plan is to provide the:
- A. basis for the risk assessment associated with each specific piece of equipment.
- B. safety and professional conduct policy for the inspector assigned to the supplier/vendor.
- C. experience, training and certification record of each source inspector assigned to each supplier/vendor.
- D. project specific details on how the inspection activities performed will meet the expected quality.
Correct Answer: D 🗳️
Explanation: Only visible for Lead2Passed members. You can sign-up / login (it's free).
According to the referenced API standard in the guide, special purpose induction motors covered by API STD
541 are:
- A. 1000 kW and larger only
- B. 375 kW (500 hp) and larger
- C. 250 hp and larger
- D. 100 hp and larger
Correct Answer: B 🗳️
Which item is part of typical final inspection and shipping preparation for a liquid-immersed transformer?
- A. Reissue of procurement bid tabs
- B. Elimination of all documentation requirements
- C. Reclassification of the project risk register
- D. Verification that all FAT issues are resolved
Correct Answer: D 🗳️
According to IEEE 841, unless otherwise specified, all electrical performance tests shall be conducted in accordance with:
- A. IEEE Std 117.
- B. IEEE Std 112.
- C. IEEE Std 522.
- D. NEMA MG-1.
Correct Answer: B 🗳️
Explanation: Only visible for Lead2Passed members. You can sign-up / login (it's free).
According to API 541, subsequent to completion of manufacture and testing, the vendor shall revise and resubmit the previously supplied purchase data including all the following except:
- A. rotor-balance report.
- B. operating manual.
- C. as-built data sheet.
- D. shop test data.
Correct Answer: A 🗳️
Explanation: Only visible for Lead2Passed members. You can sign-up / login (it's free).
Viewing page 1 out of 23 pages.
Viewing questions 1-5 out of 113 questions.
999 Customer Reviews
